Roller Chain Manufacturer
Short-pitch precision roller chains in ANSI and DIN/ISO series, single to multi-strand — the workhorse of industrial power transmission.
Series Table
tick rows to build your inquiry listANSI series (B29.1) — minimum ultimate tensile strength
| Chain No. | Pitch (mm) | Roller dia (mm) | Inner width (mm) | Tensile min (kN) | |
|---|---|---|---|---|---|
| 25 | 6.35 | 3.30 | 3.18 | 3.5 | |
| 35 | 9.525 | 5.08 | 4.78 | 7.9 | |
| 40 | 12.70 | 7.92 | 7.85 | 13.9 | |
| 50 | 15.875 | 10.16 | 9.40 | 21.7 | |
| 60 | 19.05 | 11.91 | 12.57 | 31.3 | |
| 80 | 25.40 | 15.88 | 15.75 | 55.6 | |
| 100 | 31.75 | 19.05 | 18.90 | 86.9 | |
| 120 | 38.10 | 22.23 | 25.22 | 125.1 | |
| 140 | 44.45 | 25.40 | 25.22 | 170.3 | |
| 160 | 50.80 | 28.58 | 31.55 | 222.4 |
Dimensions per ANSI/ASME B29.1. Tensile values are the standard minimum ultimate tensile strength (single strand), not working load — apply an appropriate safety factor. ANSI 25 and 35 are rollerless (bushing) chains; the diameter shown is the bushing OD. Confirm exact data against the manufacturer’s data sheet for your order.
DIN 8187 series — minimum ultimate tensile strength
| Chain No. | Pitch (mm) | Roller dia (mm) | Inner width (mm) | Tensile min (kN) | |
|---|---|---|---|---|---|
| 06B | 9.525 | 6.35 | 5.72 | 8.9 | |
| 08B | 12.70 | 8.51 | 7.75 | 17.8 | |
| 10B | 15.875 | 10.16 | 9.65 | 22.2 | |
| 12B | 19.05 | 12.07 | 11.68 | 28.9 | |
| 16B | 25.40 | 15.88 | 17.02 | 60.0 | |
| 20B | 31.75 | 19.05 | 19.56 | 95.0 | |
| 24B | 38.10 | 25.40 | 25.40 | 160.0 | |
| 28B | 44.45 | 27.94 | 30.99 | 200.0 | |
| 32B | 50.80 | 29.21 | 30.99 | 260.0 |
Dimensions per DIN 8187 / ISO 606 (B series). Tensile values are the standard minimum ultimate tensile strength (single strand), not working load — apply an appropriate safety factor. Confirm exact data against the manufacturer’s data sheet for your order.
What to Check
buying checklist- Chain No.Match your existing chain: ANSI 40–160 or DIN 08B–32B
- StrandsSingle, duplex, triplex — tensile scales with strands
- MaterialCarbon steel standard; stainless on request
- LubricationPer application — discuss sealed options for dusty duty
- LengthCut to length or endless; MOQ 1 meter
Customization
Non-standard pitches, extended pins, and special attachments are reviewed against your drawing; lead time confirmed per order (typically about one month).
MOQ 1 meter. FOB / CIF / CFR / EXW. Lead time about 1 month. Nearest ports: Shanghai, Ningbo.
Request a quoteRequest a Quote
Send your chain number, standard, pitch and quantity. Drawings welcome.